Twins Gloves Vs Fairtex

Lesson 2, "and the strings?

To play the instrument we also know the ropes.

The violin is an instrument tuned in fifths, ie each string is increased by five degrees the height of the previous sound. First, the thickest, is sun, the second is re , the third is the thinner and my . (Counting the grades: SOL if you do re mi fa sol do re MI LA if: ONE two three four five ... As we see, if SOL is the first degree, RE is the fifth, with reference to the scale of the sun; and in turn the fifth grade is on IR, and my fifth in relation to LA).

In a score, the sun of the first string, or sun serious, corresponds to the note placed under the second additional line below the staff, the re severe (second string) is the right note below the first line of the staff, from the bottom, the the (third string) is the note that is written in the second space of the staff, also from the bottom, and my (fourth string) is the note that appears in the fourth space of the staff.

[NOTICE OF OUR SPONSORS: Various methods and violin sheet music notation are Anglo, so it fits refer you here to make your knowledge. In the Anglo-Saxon names of the notes are represented by letters: do (C), re (D), mi (E), F (F), Sun (G), the (A) and if (B)]

The sun serious played "on air" on the violin, that is, without any finger (0) press the rope. With our index finger (first finger or 1) touches the note by pressing the string sun. For proper tuning, you must follow the following:

INSTRUCTIONS FOR YOUR SOUNDS LIKE THE GOD SEND

1) Provide a violin and bow tarred. 2) Make sure the cord is properly sun tune. (If you can not refine it, refine it to your teacher or help yourself with an electronic tuner set to 440 Hz). 3) Put in place a violinist. 4) Place the distal phalanx of index finger (first finger ) next to the nut. The third phalanx is where the hand becomes finger. 5) Lower the finger, making a square, directly on the rope. 6) Listen to the sound and compare with what your tuner records. If the display shows an A (la) and a green light turns on, mission accomplished!

so easy, right? Well, what about the other sounds? For as to the if you follow the , the note is played with the second finger (the middle or heart or 2), without removing the first. Since the musical scale is a perfect sound from the and if to play if on violin should leave a space between the first and second toe. Such a space that would fit one finger between them. do note is played with the third finger (ring or 3), leaving it slightly attached to the second finger and holding it, and the first finger on the fingerboard. In this case, fingers together because between if do and there is only a half step on the scale Music. Why? Likely reasons for the physics of sound.

The re corresponding to the second string can also be played by pressing the string sun with the fourth finger (pinkie or 4), leaving the space of a finger on the do and all other fingers in positions. In this regard, it is important to remember that proper execution will not boost demand fingers as you go from a lower note (or bad) to higher (or acute) or use all the fingers that correspond to the note. Walk around it because some apprentices of violinists who play the do only with the third finger, leaving the other to air.

In the other strings, the system is (almost) the same. This way of playing up to what is known as the first position of the left hand. How, how how?

[NOTICE OF OUR OTHER SPONSORS: left hand used several positions along the pitch to cover the scale of sounds, and the rope sun: after re follows the my but as all the fingers of our hands are busy, if we play a my rope in sun, the hand must be traveled enough to touch the first finger a if not the the originally played. When mastered fingering on the fingerboard, the violinist knows exactly how much should go hand to hand with your first finger higher notes, sound and artistically speaking, and able to type in the following.]

say it is almost the same method because the strings re and the second finger is placed in different ways: attached to the first finger. This is because in these strings the notes "of the second toe, rather, the heights of their respective sounds are of a semitone from the previous. Thus, in the string re: re (0), mi (1), F (2), sun (3), the (4), and the : the (0), if (1), do (2), re (3), my (4). [The numbers in parentheses represent the fingers.]

In these strings, the separation of the second finger on the first fa are respectively do and sustained.

recap: 1) each string of the violin has a pitch fifth grade from the previous (sol, re, la, mi), 2) the distal phalanx of first finger should be placed next to the nut of the violin 3) the first finger on each string falls into a kind of square and 4) the typing of successive notes is done by letting the space of a finger or attached to the whole tone above as appropriate or semitone and 4) each note uses the same number of fingers that corresponds.

Glory Hole, Orlando, Fl

Notes on the violin, as they say, lesson I. .. Nobody

Afternoon but surely, I come again. I offer on this occasion a cultural breviary to meet our friend the violin. Proceed to review the anatomy from top: the top of the instrument is crowned by the head or scroll (Eng. scroll), which seems a sort of conch. Immediately below it is the box of pegs or peg ( peg box), which are inserted each pins (pegs ), which serve to keep the instrument tuned. In each of these pins are inserted strings sun (lower left pin, with reference to the illustration of the violin that accompanies this text), re (top left), the (upper right) and me (bottom right). It is important that the strings are threaded on the pins so that the voltage is higher as the same turning the pins to the scroll, and turning them loose on button (buttom end ). It is also important not to tighten the strings too because they can rupture and even damage to our dear friend with the lash to give the break. (For those who have not tuned ear that plane we fail to recognize the height of each of the sounds, it is useful to purchase an electronic tuner from any store selling musical instruments. Over time, one is slowly grasping wave.)

The part that mediates between the headstock and the body of the violin, called neck (neck ), on which is the pitch ( fingerboard). Let's step back, to greet the nut (nut ) that joins the neck or neck with the headstock.

Each of the strings extending from the pin to the tailpiece or tiracuerdas ( tailpiece), the piece of black wood (ebony) that rises to the right side of the chin support or chin (chin rest ) and which also embed the tuners ( fine tuners), a type of screws used to more precisely adjust the pitch string. The ridge is attached at the bottom of the button, already mentioned, which offers a contrary point of tension to the neck for the string tension.

The bridge ( bridge) is the clear piece of wood whose function is to keep tensions high and the strings for the smooth sound of the instrument. This is a very delicate piece, as it may break up due to the tension of the strings when they come to break and requires a precise position on the instrument. Viewed from the front, a curved higher side than the other. On the instrument, is positioned so that the high side is to the left, more or less the center of the S-shaped holes (these holes are towards its middle a small horizontal needle, which provides the framework for locating the bridge). If you want more information and care to know about tools, I recommend the blog http://zenker-instrumentos.blogspot.com/2007/09/introduccion-la-mayora-de-los.html

The sound produced by vibration of the strings is captured by the instrument thanks to these S-shaped holes, called ears, eses or Fs ( F holes) and funnel sound waves into or soundboard.

This soundboard, which itself would be the body of the violin, the leaf is so suggestively how female. The top, which are the ears, known as table harmonic ( sound board ) and its sides are the ribs steak ( upper bout) and flange ( C bout ). In the soundboard is the mainstay or soul (sound post ).

olvidársenos should not your partner, bow ( bow ), Which begins at the tip ( tip) to the heel ( frog) the entire length of the rod ( stick). Towards the bottom is the twisted ( winding), which rely on the fingers holding it, the ferrule (ferrule ) And the screw ( Adjusting screw), used to adjust the bristles or horsehair ( bow hair). When the instrument is new, is to rub the bristles on resin or pitch ( rosin ) until there is sound. Otherwise, you may think scammers with a violin mute. Sayonara!